9
After Sales Support TEL: 1300 886 649
Low battery alert
This symbol displayed on the screen indicates the battery level is low.
This symbol displayed on the screen, together with a beeping sound, indicates the battery level is
low: you must change the battery.
NOTE: The unit will automatically turn o when out of battery.
Charging
The battery icon ashes while charging. It stops ashing when the batteries are fully charged. If the unit
is on while charging, the screen shows the current channel and the unit can receive signals only. The
CALL and PTT key is not available for use.
1. Please charge any rechargeable batteries (not supplied) before rst use.
2. Use an AC charger (not supplied) to recharge any rechargeable batteries (not supplied).
3. Supply power: 7.5V / 300mA.
4. To fully charge the battery takes 1-8 hours, depending on how much charge is left in the battery.
Setting memory
The unit will memorise the last setting selected before you turn the radio o and will automatically
resume to it when you turn the radio on again. However, the setting will not be memorised if you turn
o the unit and take out the batteries.
Technical specications
Description Specications
Power output 500mW
Operating frequency 476.425 --- 477.400MHz
Channels 40
CTCSS sub-codes 38
Modulation FM
Communication range Unobstructed conditions: up to 3km
Power source 3 x AAA alkaline batteries or Ni-MH AAA 600mAh 1.2V rechargeable
batteries
(Do not mix alkaline and rechargeable batteries in the same unit.)
Battery life 10 hours for AAA batteries (5% transmission, 5% reception, 90% stand-by)
Screen Backlit
To Next Page
Loading...