Texas Instruments Extensa 660 Series - FRU Removal;Replacement Procedures

Field Service 6-9
6.5 FRU Removal/Replacement Procedures
The following paragraphs contain field service-level removal/replacement procedures
for the 660 Series Notebook Computers.
Most FRU removal/replacement procedures involve connecting and disconnecting cable
connectors. The Extensa series uses two types of connectors including:
♦ Locking-type connectors - use a plastic stick to unlock and lock these type of
connectors as shown in Figure 6-4.
♦ Non-locking connectors
Options
Battery, Primary, Li-Ion 6.5.1 9813130-0001
Battery, Secondary, Li-Ion 6.5.2 9813131-0001
External Battery Charger, U.S. Ref 9813134-0001
External Battery Charger, WW Ref 9813134-0004
Auto Adapter Ref 9813126-0001
Port Replicator, Extensa 65X/66X Ref 9813564-0001
FDD w/Cable, (External) 6.5.2 9813561-0001
HDD Kit, 2.1 GB 6.5.5 9813125-0001
RAM Module, 16 MB Section 2 9811344-0002
RAM Module, 32 MB Section 2 9811344-0003
Table 6-3 Customer-Replaceable Units (CRUs)
Base Assembly FRU Description Assembly/
Disassembly
Paragraph
TI Part No.