Field Service 6-11
Figure 6-5 Battery Removal/Replacement
6.5.2 Removing/Replacing a Media Bay Device
The computer has a latch-controlled locking mechanism that prevents accidental
removal of devices from the modular bay.
Follow these steps to change modules.
1. Turn off the computer.
2. Press the release latch on the bottom of the computer as shown in Figure 6-6.
3. Pull out the accessory currently in the modular bay.
Secondary
Battery Release
Latch
Optional Media
Bay Secondary
Battery Pack
(Li-Ion)
NiMH or Li-Ion
Primary Battery
Primary Battery Release
Latch
To Next Page
Loading...
