EasyManua.ls Logo

Texas Instruments Extensa 660 Series - Installing an External Serial Port Device

Texas Instruments Extensa 660 Series
147 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation 2-9
2.4.3 Installing an External Serial Port Device
The notebook contains an external RS-232 serial port with a 9-pin, male DB-9 connector
as shown in Figure 2-6 (25-pin cables require the use of an adapter for use with the
9-pin port). The serial ports are used to interconnect such devices as:
External Modem
Serial Mouse
Serial Printer
Any device that uses an RS-232 interface
Caution: Never connect a parallel device to a serial port or a serial device
to a parallel port or video port; this may cause damage to the notebook
and/or external device. If you are uncertain of what type connector the
external device has, refer to the technical manual for the external device.
Figure 2-6 Serial Port Pinouts

Table of Contents

Related product manuals