2.
Place the new roll of paper behind the calculator so that the paper unrolls
from the bottom of the spindle. If there is paper remaining in the printer,
use this step to install paper and skip step
3.
Otherwise, proceed with
step
3.
Insert the end of the new paper between the rubber drum and the
remaining paper as shown. Press
[_j]
until the new paper is in position
and the old piece of paper is completely out of the printer.
PAPER
FROM OLD ROLL
3.
Use this step to install paper when a piece of paper is NOT remaining in
the printer.
insert the end of the new roll between the rubber drum and the rounded
portion of the paper cradle. Using the fingertips of your left hand, gently
24
To Next Page
Loading...
Need help?
General
