Texas Instruments TI-89 Software Guide

268
Section 3: Assembler
TI
-
89 / TI
-
92 Plus Sierra C Assembler Reference Manual
Not for Distribution
Beta Version February 2, 2001
.val / VAL — Set Value Attribute
Syntax
.val value
VAL value
Description
value
Specifies the value of the current symbol. It is an absolute or
simple relocatable expression.
The
.val / VAL
directive sets the value attribute of the symbol referenced by the
current attribute block (see
.def / DEF
directive). The meaning of the value
attribute is dependent upon the selected storage class (see section
1.4.8.4 Symbol Value Field
). This directive can appear at most once per symbol
attribute block.
The
.val / VAL
directive is typically used only for C source-level debugging; it is
ignored when assembler source-level debugging information is generated with
the
-L
command line flag (see also
.type / TYPE
directive).
Example
DEF x
VAL x ; x is a variable

its value is its location
SCL 2
TYPE 4
ENDEF

Texas Instruments TI-89 Specifications

General

Display size (HxV)	100 x 160 mm
Memory type	639K FLASH ROM, 188K bytes RAM
Compatible operating systems	Operating System 2.09
Battery type	AAA