Texas Instruments TI-99/4A - Page 59

EDIT
FCTN - (LEFT) - The Left·Arrow (backspace) key moves the
cursor one position to
thp. ldt. When the rllrsor moVf~S over a
character it does not delete or change it in any way.
FCTN - (RIGHT) - The Right-Arrow (forwardspace) key moves
the cursor one position to the right. Using this
key allows you to
move the cursor over a
character without deleting or changing it in
any way.
FCTN 2 (INS) - The Insert key works in Edit Mode just as it does
in Command Mode. See Special Keys for information.
FCTN 1 (DEL) - The Delete key works in Edit Mode just as it does
in
Command Mode. See Special Keys for information.
FCTN 4 (CLEAR) - If you press the Clear key at any tIme while in
Edit Mode. the current line scrolls up on the screen and the
computer leaves
Edit Mode. Any changes which had been made on
the line before you pressed the
Clear key are ignored. Thus, the
existing program line does not change.
FCTN 3 (ERASE) - The Erase key erases the entire text of the
program line currently displayed for editing. The line number is not
erased.
User's Reference Guide
II-39