Texas Instruments Tiva TM4C123GH6PM User Manual

System Tick (SysTick)
20.2.1.4 ROM_SysTickIntEnable
Enables the SysTick interrupt.
Prototype:
void
ROM_SysTickIntEnable(void)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_SYSTICKTABLE is an array of pointers located at ROM_APITABLE[10].
ROM_SysTickIntEnable is a function pointer located at ROM_SYSTICKTABLE[3].
Description:
This function will enable the SysTick interrupt, allowing it to be reflected to the processor.
Note:
The SysTick interrupt handler does not need to clear the SysTick interrupt source as this is
done automatically by NVIC when the interrupt handler is called.
Returns:
None.
20.2.1.5 ROM_SysTickPeriodGet
Gets the period of the SysTick counter.
Prototype:
uint32_t
ROM_SysTickPeriodGet(void)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_SYSTICKTABLE is an array of pointers located at ROM_APITABLE[10].
ROM_SysTickPeriodGet is a function pointer located at ROM_SYSTICKTABLE[6].
Description:
This function returns the rate at which the SysTick counter wraps; this equates to the number
of processor clocks between interrupts.
Returns:
Returns the period of the SysTick counter.
20.2.1.6 ROM_SysTickPeriodSet
Sets the period of the SysTick counter.
Prototype:
void
ROM_SysTickPeriodSet(uint32_t ui32Period)
April 8, 2013 229

Texas Instruments Tiva TM4C123GH6PM Specifications

General

Core	ARM Cortex-M4F
Clock Speed	80 MHz
Flash Memory	256 KB
SRAM	32 KB
GPIO Pins	43
UART	8
I2C	2
SPI/SSI	4
USB	USB 2.0
Timers	6
Communication Interfaces	UART, I2C, SPI, USB
Operating Temperature	-40°C to 85°C
Package	LQFP64

Summary

Boot Loader

Introduction

Explains the ROM-based boot loader and its interfaces for flash updates.

Serial Interfaces

Details the UART, SSI, and I2C interfaces used by the boot loader.

USB Interface

Describes the USB boot loader functionality using the DFU protocol.

Controller Area Network (CAN)

Flash

GPIO

Hibernation Module

Inter-Integrated Circuit (I2C)

Interrupt Controller (NVIC)

Memory Protection Unit (MPU)

Pulse Width Modulator (PWM)

Synchronous Serial Interface (SSI)

System Control

Timer

UART

uDMA Controller

USB Controller

Using USB with the uDMA Controller

Watchdog Timer

Introduction

Functions

Lists and describes API functions for watchdog timer configuration, interrupts, and lock mechanism.