To Next PageTo Next PageHow to fix a spool head that is difficult to turn on Texas Lawn and Garden Equipment?
If the spool head on your Texas Lawn and Garden Equipment is difficult to turn, the threads might be dirty, damaged, or full of grass. Try cleaning the threads and greasing or changing the spool head. Also, remove any grass.
Why the line cannot be pulled forward on my Texas Lawn and Garden Equipment?
If the line on your Texas Lawn and Garden Equipment cannot be pulled forward, it might be melted together, in which case you should replace it. This can happen if you're using the tool too close to stones and walls. Alternatively, there might not be enough line, so try fitting more line.
What to do if Texas Lawn and Garden Equipment engine starts, runs, and accelerates but can not run idle?
If your Texas Lawn and Garden Equipment engine starts, runs, and accelerates but cannot run idle, the carburetor likely needs adjustment. Contact your local dealer for assistance.
What to do if Texas CG230B engine does not run on full power and smokes heavily?
If your Texas Grass trimmer engine lacks full power and smokes a lot, check the fuel mix and use new fuel with the correct mix. Another possible reason is that the air filter is dirty, so you should clean or replace it. It may also be necessary to contact your local dealer for carburetor adjustment.
What to do if Texas Lawn and Garden Equipment engine starts but does not accelerate?
If your Texas Lawn and Garden Equipment engine starts but won't accelerate, the carburetor likely needs adjustment. Contact your local dealer for assistance.
Why is oil leaking from the exhaust of my Texas Lawn and Garden Equipment?
If oil is leaking from the exhaust of your Texas Lawn and Garden Equipment, ensure the trimmer is used on full power. Also, check the fuel mix, using new fuel with the correct two-stroke mix. A dirty air filter can also cause this issue, so clean or replace it. If the problem persists, the carburetor may need adjustment, and you should contact your local dealer.
What to do if my Texas Lawn and Garden Equipment engine does not run on full power and smokes heavily?
If your Texas Lawn and Garden Equipment engine isn't running on full power and is smoking heavily, start by checking the fuel mix and ensure you are using new fuel with the correct mix. Also, inspect the air filter; it may need cleaning or replacing. If these steps don't resolve the issue, the carburetor may need adjustment, and you should contact your local dealer.
Why my Texas Lawn and Garden Equipment engine does not start?
If your Texas Lawn and Garden Equipment engine isn't starting, there could be several reasons. First, check the spark plug; if there are no sparks, try a new one. If that doesn't work, contact your local dealer. Another possibility is no fuel; try pressing the fuel primer. If the issue remains, contact your local dealer. Also, the engine might be drowned; in this case, remove the spark plug, turn the trimmer so the spark plug hole faces the ground, switch the choke to RUN, and pull the starter 10-15 times. Clean and refit the spark plug or replace it. Finally, if the starter is harder to pull than usual, contact your local dealer.
What causes the spool head of my Texas Grass trimmer to be difficult to turn?
If the spool head of your Texas Grass trimmer is difficult to turn, the threads might be dirty, damaged, or full of grass. Clean the threads, grease or change the spool head, and remove any grass.
Why the line of my Texas CG230B cannot be pulled forward?
If the line of your Texas Grass trimmer cannot be pulled forward, it could be because the line is melted together. Replace the line, and consider that you may be using the tool too close to stones and walls. Another reason might be that there is too little line, so fit more line.
Details warning symbols, safety rules, and personal injury prevention measures.
Steps for detaching the trimmer head and installing the cutting blade.
Guidelines for using the blade safely and effectively.
Steps for removing the blade and installing the trimmer head.
Information on correct fuel-to-oil ratio, storage, and handling.
Critical safety rules to follow when refueling the machine.
Detailed steps for starting the engine from a cold state.
Instructions for safely shutting down the engine.
Guidance on proper usage, cutting techniques, and line extension.
Procedures for cleaning or replacing the air filter for optimal performance.
General| Engine Type | 2-stroke |
|---|---|
| Engine Displacement | 25.4 cc |
| Shaft Type | Straight |
| Power source | Gasoline |
| Fuel Tank Capacity | 0.6 L |
