Texecom Odyssey X Series User Manual

INS627-8 13/44
1.8 Inserting the Odyssey X3 graphic
(available separately, (see chapter 1.3)
1. Removing the light diffuser
Gently flex the two sides of the lid outwards to release the light diffuser at
point A.
Push the lens tabs inwards to disengage the light diffuser.
Lift the light diffuser upwards to release.
N Please make sure this operation is done in a clean dry environment. where
the diffuser and lid are not likely to be scratched or damaged.

Texecom Odyssey X Series Specifications

General

Brand	Texecom
Model	Odyssey X Series
Category	Marine Equipment
Language	English