INS627-8 16/44
1.9 Odyssey X-W (Premier Elite V2.11.X or later)
Battery Insertion & Learning procedure
When installing a wireless sounder, the batteries should be installed and the device
learned to the panel BEFORE it is mounted in the chosen location. The sounder
should always be the last fixed device learned and installed.
N All other fixed devices should be in their desired location before learning the
sounder
The following sequence should be used.
Access the device as described on the previous pages.1.
Install the batteries into the holder2.
Connect battery pack to PCB3.
Learn sounder to panel4.
To Next Page
Loading...
