Texecom Odyssey X Series User Manual

INS627-8 6/44
1. Select the desired
location for the sounder
2. Install 8 core cable
from the sounder
location back to the
control panel or
expander
3. Install the sounder
4. Commission the
system
1. Install the control
panel/wireless receiver
2. Learn all other
witeless devices, and
install them in their final
locations.
3. Learn wireless
sounder
4. Install wioreless
sounder in desired
location
5. Commission system
6. Check signal security
of all wireless devices
1. Select the desired location
for the deterrent
2. If using battery power,
install the batteries and
move the power select
jumper link to battery.
3. If using a PSU to power
the device, install a
minimum 2 core cable from
the PSU and connect to the
Power in terminals.
4. Move the power select
jumper to the Line position
1.5 Accessing the Unit
Odyssey X1 Shown, all models are the same.
Undo the screw ( no need to remove it completely) and depress the tab to
open the lid

Texecom Odyssey X Series Specifications

General

Brand	Texecom
Model	Odyssey X Series
Category	Marine Equipment
Language	English