Texecom PREMIER 48 - To ARM Individual Areas

Operating the Alarm System Premier Series User Guide
16 INS177
To ARM Individual Areas
If the system has been split up into separate areas of protection i.e. Area 1 = House,
Area 2 = Garage, Area 3 = Shed etc. These areas can be individually selected for FULL
or PART arming as required.
!"
Areas are selected by using keys
!
-
5
(the
*
key can also be used to
select an area followed by
(
or
$
).
Only areas that exist on the system can be selected. (a star means the area can be
selected and a dot means the area cannot be selected).
Pressing
3
will select/deselect all areas, pressing
(
will toggle between the
first 8 areas and the second 8 areas (where applicable).
To select areas for arming, proceed as follows:
Ensure that the premises are secure (all windows and doors not
being omitted are closed) and the Ready light is on.
Enter a valid User code
1111
K($6(=$9"13$3(
%&'$+653,'E
Press
(
+,#,/3$%&,"5$L
$$L$III)))))$[
Use keys
!
-
5
to select the required area
+,#,/3$%&,"5$L
$$L$%DIIII))$[
Press
#
or
&
to FULL arm
Or
Press
'!
,
0
or
,
followed by
#
or
&
to PART arm
The exit tone will sound (if silent arm has not been selected)
%&,"5$.1$0W.3$L
$$$$%D))))))$
Leave the premises
When the areas have armed, the exit tone (if sounding) will stop
%&,"5$%&',H$L
$$$$%D))))))
The selected areas are now armed.