Texecom PREMIER 48 - To SELECT Areas for Chime

Premier Series User Guide Operating the Alarm System
INS177 25
To SELECT Areas for Chime
When a zone is enabled for Chime the Keypad will generate a chime tone every time the
zone is activated. Users with access to this function will be able to turn Chime on and off
for selected areas.
Zones within an area can be individually programmed for Chime in Edit Chime Zones
(see page 34 for details).
!"
Only areas that have been programmed for ‘Chime’ can be selected. A star means
the area can be selected and a dot means the area cannot be selected.
Pressing
3
will select/deselect all areas.
Pressing
(
will toggle between areas A to H and I to P (Premier 168 only).
To select an area for Chime, proceed as follows:
Enter a valid User code
1111
K($6(=$9"13$3(
%&'$+653,'E
2
Press
&
01"X#,$!B.',$(1
$$L$III)))))$[
Use keys
!
-
5
to select/deselect areas
(i.e.
!
,
0
and
,
= Areas A, B and C)
01"X#,$!B.',$(1
$$L$%D!)))))$[
Press
#
when finished
Press
)
to exit the menu
The display will return to normal.