Premier Elite 12-W/24-W/48-W Quick Start Guide
8 INS531-4
Premier Elite SmartKey™
Introduction
Premier Elite SmartKey™ are learnt and all functionality managed through the
“Setup Users” Menu.
In multiple expander systems it is now possible to choose which zones (and
therefore expander) the Premier Elite SmartKey™ will use for its routeing, LED
and Aux functions can also be changed within the “Setup Users” menu.
All users on the system can have a Premier Elite SmartKey™ a TAG and a
code, or any combination of them.
All other user programmable options can be found in INS176-8 or later Premier
Elite Series Installation Manual.
Great care should be taken when using large numbers of Premier Elite SmartKey™,
only one Premier Elite SmartKey™ per expander can be used by the system at any
one time, and on Multiple expanders systems, or large sites, functionality should be
checked in all areas of the site where the device may be used.
Premier Elite SmartKey™ Routeing
Premier Elite SmartKey™ should only be learned to the system AFTER all
devices have been learned and placed in their final location. Whilst it is
possible to learn at any point during the programming of the system, learning
and testing the functionality of the Premier Elite SmartKey™ after all devices
have been placed will ensure that the Premier Elite SmartKey™ performs as
expected, and works in locations where the user would expect it too.
Route By
The Route By function allows you to select which Zones (and therefore
expander) the Premier Elite SmartKey™ will use on the system for its routeing.
This should be selected BEFORE the device has been learned.
In the examples below Fig 1 shows the zones associated with Expander 1,
which is a 32XP-W, and Fig 2 shows Expander 2 which is also a 32XP-W, when
using 8XP-W there will obviously be less devices that the Premier Elite
SmartKey™ can use.
User001 Route By
Zones 009 - 040
User001 Route By
Zones 041 - 072
Fig 2
The
key is used to select this menu and the key used to select
which expander and associated zones will be used
Once a Premier Elite SmartKey™ has been learned the
key will show
which zones are being used for routeing. It is not possible to alter this once
learned. To change the routeing the Premier Elite SmartKey™ should be
deleted and the process started from the beginning.
LED & Aux Functions
Please refer to INS467 for details of the LED & Aux functions.
Deleting a Premier Elite SmartKey™
Deleting the Premier Elite SmartKey™ from the user is a similar process to
learning, at the appropriate point in the menu press
followed by ,
the Premier Elite SmartKey™ will be removed from the User. To delete all user
data see INS176-8 or later.
Please see the diagram on the next page which details the process used to
choose routeing and learn Premier Elite SmartKey™ to users.
Learning
Premier Elite SmartKey™
Setup Users
User002:
YES to Select:-
Setup Users
y
O
User002 Ricochet
Fob --- Aux
User002 Ricochet
Learning... 20s
User002 Ricochet
Fob LED Aux
?
User002 Ricochet
Free
*
*
to toggle L ED on or off
to toggle Aux on or off
* Please refer to INS 467“Premier E lite S martKey”
for further details on the LE D & Aux functions.
User002 Route By
Zones 009 - 040
Us ing the key at this point allow s
you to view the group of zones,
a nd therefore the expander
that the S ma rtK ey will us e.
Us e the ke y to s ele ct the group
of Zones and Expander you want to use
User002 Route By
Zones 009 - 040
N
Use scroll
to next us e r
Once the 16 slots on a XP-W are taken up, the learn process will fail and display 'No
spaces left'.
In either of the Premier Elite SmartKey™ menu displays, any Premier Elite
SmartKey™ that logs onto the system will cause the menu to change to that Premier
Elite SmartKey™ - a handy way of finding out which user a Premier Elite SmartKey™
in your hand belongs to!
Ricochet Diagnostics
Engineer Utilities now includes a new Ricochet™ Diagnostics menu. This menu
displays information about the live system, and is split into Premier Elite
SmartKey™ and Ricochet devices via Zones and Users.
Devices
For Devices the following information can be viewed:-
• Routeing
• RSSI
• Alarms and Status
• Device visibility
• Time since last message
Premier Elite SmartKey™
For Premier Elite SmartKey™ the following information can be viewed:-
• Routeing
• RSSI
• Premier Elite SmartKey™ Button
• Status
Interpreting Keypad Displays
Routeing
The image below shows that Zone 009 is routeing through 14 and then 7 to the
expander, for Premier Elite SmartKey™ this may vary depending on where &
when the reading is taken. If question marks appear in the display it means the
information is not available.
Zone 009 PIR
->014->007->XP
RSSI
Each value in the image below represents the RSSI levels in dBm at each of the
hops. If question marks appear on the display it means the information is not
available.
To Next Page
Loading...
