Texecom Veritas Excel User Manual

Veritas Excel User Guide Master User Programming
INS166 19
Null
3
The Null level is the only level which can be changed both by a Master User and
by a Boss Engineer. The Null level has two functions:
1. If a User is no longer required, its Access Level should be changed to Null.
This will erase the associated Access code.
2. To change a Customer Access Type to an Installer Access Type, or vice
versa, it must first be changed to the Null level.
Boss Engineer
9
Boss Engineers cannot change Customer Access Levels or Customer Access
codes. They can only change Installer Access Levels and Installer Access codes.
Boss Engineers can also access all system programming options.
Access Type
There are two Access Types, Customer and Installer. The Boss Engineer level can
only program the Installer Types. The Master User Level can only program the
Customer Types.
The table below shows a summary of each Access Level and who is responsible
for assigning the level:
Access Level
Access Level
Number
Access
Type
Can be
Programmed
by
User
% 2
Customer Master
'!&%
Engineer
& 2
Installer Boss
####
PA (Panic)
! 2
Customer Master
'!&%
Duress
' 2
Customer Master
'!&%
Master User
1 2
Customer Master
'!&%
Cleaner
. 2
Customer Master
'!&%
Null
3 2
Customer
Installer
Master
'!&%
Boss
####
Boss Engineer
9 2
Installer Boss
####

Texecom Veritas Excel Specifications

General

Display	LED
Zones	8
Power Supply	12V DC
Arming Modes	Full, Part, Night
Tamper Protection	Yes
Weight	200g
Compatibility	Texecom Veritas control panels
Current Consumption	30mA
Operating Humidity	0% to 95% non-condensing