Lifting o f presser foot(Fig. 14, Fig. 15)
Threading the Needle Thread (Fig. 13)
11
Caution:
1.To prevent the unexpected startup of sewing machine, trim off
the power supply before the operation is conducted.
Fig.13
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
11
12
13
14
15
①
②
③
④
⑤
⑨
⑥
⑦
⑩
11
12
13
14
15
⑧
12
1.Lift presser foot controlled by hands
1)Shut down the machine, turn presser footlever ① in direction A to uplift the presser foot (for
about
5.5 mm).
2)When presser foot lever ①
is turned in direction B, presser foot will be returned to its original
position.
2.Lift presser foot controlled by knees
The presser foot ③ can be raised by pressing the knee lifter plate ②
. (Height of presser lifting is
relate to the degree of knees pressing) The height of presser foot are respectively about 10mm
and 13mm when pressing knees fully. The lifting presser foot ③ lowers as soon as loosing the
knee lifter plate ② release.
To Next Page
Loading...
