Do you have a question about the Texsport 02836 and is the answer not in the manual?
Connect number 1 pole sections to center hub and number 2 pole sections to wide Y joints.
Insert number 3 poles into wide Y joints and number 4 poles into small Y joints.
Insert top section of number 5 leg poles into number 5 section of small Y joints.
Drape arbor skin over the frame and stretch it over the corner joints.
Raise the remaining sections of the chain-corded leg poles to their full height.
Pull arbor skin down leg poles and connect T-clips to the poles.
Enter arbor and connect skin to leg poles using attached velcro strips.
Attach guy ropes and stake down the arbor to secure it.
Arbor fabrics are flame retardant, but avoid using open flames near or in the arbor.
Always stake down the arbor securely, away from campfires, to prevent damage.
New arbors require seam sealing for water tightness; use recommended spray sealer.
Use appropriate stakes (sand, steel, skewer, snow) based on soil conditions.
Lubricate sticking zippers with silicone; avoid forcing zippers with caught material.
Store arbors dry, loosely folded, away from heat, water, and pests like mice.
Hand wash with mild soap; reapply seam sealer after washing to maintain waterproofing.
UV rays and storing damp can degrade nylon; avoid insect/hair sprays on fabric.
Use rip-stop nylon patches for small tears; consider a tent repair kit.
Contact customer service for questions, problems, or comments via phone or email.
| Brand | Texsport |
|---|---|
| Model | 02836 |
| Material | Polyester |
| Floor Material | Polyethylene |
| Water Resistance | Water-resistant |
| Door | D-style door |
| Product Type | Tent |
| Ventilation | Mesh |
| Type | Dome tent |
| Frame | Fiberglass |
Loading...