Textron Bell 412 - 5-22. EACH 150 HOURS OF STARTER GENERATOR (200 SG119 Q) OPERATION

BHT-412-MM-2
5-00-00
Export Classification C, ECCN EAR99
SPECIAL INSPECTIONS
5-22. EACH 150 HOURS OF STARTER GENERATOR (200SG119Q) OPERATION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
NOTE
Accomplish each 150 hours of starter generator
200SG119Q operation or more frequently if
conditions warrant.
Part number 200SG119Q refers to the starter
generator without the QAD kit consisting of the
mounting flange and ring clamp.
This special inspection is not applicable to starter
generator 209-060-221-001.
Chapter 71 1. Remove starter generator 200SG119Q.
2. Inspect starter generator brushes for wear.
TM106 – Aircraft
Parts Corp. Overhaul
Instructions with
Illustrated Parts
Breakdown
3. If brushes are worn beyond allowable limits, refer to
vendor manual and replace in accordance with manufacturer’s
instructions.
4. Install starter generator.
26 FEB 2013 Rev. 16 Page 131/132