BHT-412-MM-2
5-00-00
Export Classification C, ECCN EAR99
CONDITIONAL INSPECTIONS
5-36. CONDITIONAL INSPECTION
Perform applicable conditional inspection of helicopter
after hard landing, after blade strike or other rotating
system torque spike, overspeed, overtorque,
compressor stall or surge, lightning strike, and after
engine combining gearbox clutch non-engagement,
misengagement, or in-flight slippage.
If overhaul evaluation is specified, complete both the
conditional inspection and normal inspection
procedures (as applicable) for that component listed in
BHT-412-CR&O.
26 FEB 2013 Rev. 16 Page 187/188
To Next Page
Loading...
