Textron Greenlee 882 User Manual

882 and 882CB Hydraulic Benders
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Description
The 882 Conduit Bender is intended to bend EMT
(electrical metallic tubing). The 882CB Conduit Bender
is intended to bend EMT, IMC (intermediate metallic
conduit), GRC (galvanized rigid conduit), and Schedule
40 Pipe. Bending shoes are available to accommodate
1-1/4" through 2" conduit and pipe.
The bender is to be coupled to any Greenlee hydraulic
pump capable of developing 10,000 psi (689.5 bar).
Suggested models include:
Hand Pump: 755
Electric Pump (120 V): 960 SAPS
975
Electric Pump (220 V): 976-22FS
976-22PS
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
882 and 882CB Hydraulic Benders
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information ........................................ 3
Identication .................................................................. 4
Setup ............................................................................. 5
Operating Instructions ................................................... 6
Glossary of Bending Terms ........................................... 7
Laying Out Bends ..................................................... 8-10
Special Bending Information Chart ........................ 11-13
Illustration—882 Series Hydraulic Benders ................. 43
Parts List—882 Series Hydraulic Benders .................. 44
Shoe Groups ............................................................... 45
Attachment Groups ..................................................... 46
Illustration and Parts List—Conversion Kit .................. 47

Textron Greenlee 882 Specifications

General

Brand	Textron
Model	Greenlee 882
Category	Construction Equipment
Language	English