51
Hydro
Midsize
FIGURE 13
HYDROGEAR PUMP
4112782 & 4163317 PUMP-HYDRO RH ILLUSTRATED AS SHOWN
2721615 & 4163316 PUMP-HYDRO LH ILLUSTRATED AS SHOWN EXCEPT GROUP A IS ROTATED
180° AROUND THE CENTERLINE OF THE PUMP.
1 70516 ----- HOUSING KIT 1
2 71615 ---- END CAP KIT 1
3 50641 ----- STRAIGHT HEADLESS PIN 2
4 50969 2721615-01 FLANGE BOLT M8-1.25 X 60 4
5 52629 4163316-01 HOUSIGN O-RING 1
6 2513027 2721615-03 CHARGE PUMP KIT (STD) 1
7 50273 2721615-04 STD GEROTOR ASSEMBLY 1
8 9004101-1340 2721615-05 O-RING 1
10 50975 4163316-02 SOCKET HEAD M6-1/0 X 20 2
15 2513030 ----- BYPASS VALVE KIT (BLANK) 1
18 70521 2721615-07 PUMP SHAFT KIT 1
19 50315 ----- BALL BEARING 17 X 40 X 12 1
20 51161 ----- LIP SEAL 17 x 40 x 12 1
21 50951 ----- SPACER 1
22 50329 ----- RETAINING RING 1
25 70723 4163316-03 CYLINDER BLOCK KIT 1
29 2003014 ----- BLOCK SPRING 1
30 2003017 ----- BLOCK THRUST WASHER 1
31 51246 2721615-09 VALVE PLATE 1
32 2003087 2721615-10 SWASHPLATE 1
34 50551 2721615-11 BALL THRUST BEARING 1
37 2003005 2721615-12 TRUNNION ARM 1
38 2000015 2721615-13 SLOT GUIDE 1
42A 2510027 2721615-14 CHECK VALVE KIT (.031") 1
42B 2510050 2721615-15 CHECK VALVE KIT (BLANK) 1
44 70402 4163316-04 CHARGE RELIEF VALVE KIT 1
49 2513043 2721615-17 TRUNNION SEAL/RETAINER KIT 1
56 9005110-4400 ----- STRAIGHT THREAD PLUG 1
66 9005110-3100 ----- 5/16 SAE PLUG 1
100 70525 2721615-18 OVERHAUL SEAL KIT 1
ITEM HYDROGEAR PART NO. PART NO. DESCRIPTION QTY
To Next Page
Loading...
