12. Stop on level ground, lower implements,
disengage drives, engage parking brake, and shut
off engine before leaving the operator’s position for
any reason including emptying the catchers or
unclogging the chute.
13. Stop equipment and inspect blades after striking
objects or if an abnormal vibration occurs. Make
necessary repairs before resuming operations.
14. Keep hands and feet away from cutting units.
15. Look behind and down before backing up to be
sure of a clear path.
16. NO RIDERS. Never carry passengers and keep
pets and bystanders away.
17. Slow down and use caution when making turns
and crossing roads and sidewalks. Stop blades if
not mowing.
18. Be aware of the mower discharge direction and do
not point it at anyone.
19. Do not operate the machine under the influence of
alcohol or drugs.
20. Use care when loading or unloading the machine
into a trailer or truck.
21. Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
IV Maintenance and storage
1. Disengage drives, lower implement, set parking
brake, stop engine and remove key or disconnect
spark plug wire. Wait for all movement to stop
before adjusting, cleaning, or repairing.
2. Clean grass and debris from cutting units, drives,
mufflers, and engine to help prevent fires. Clean
up oil or fuel spillage.
3. Let engine cool before storing and do not store near
flame.
4. Shut off fuel while storing or transporting. Do not
store fuel near flames or drain indoors.
5. Park machine on level ground. Never allow
untrained personnel to service machine.
6. Use jack stands to support components when
required.
7. Carefully release pressure from components with
stored energy.
8. Disconnect battery or remove spark plug wire
before making any repairs. Disconnect the
negative terminal first and the positive last.
Reconnect positive first and negative last.
9. Use care when checking or changing blades. Wrap
the blade(s) or wear gloves, and use caution when
servicing them. Only replace blades. Never
straighten or weld them.
10. Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
11. Charge batteries in an open well ventilated area,
away from sparks or flames. Unplug charger
before connecting or disconnecting from battery.
Wear protective clothing and use insulated tools.
12. Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
safety decals.
rev 12/98 2 - 3 09-367
SAFETY section 2
To Next Page
Loading...