The Fire Beam firebeam - Page 13

pre- alignment is the first stage of
alignment - this should only be used
without the reflector
to enter sub menus
make adjustments by using the
left, right, up and down keys
(this moves the beam in these
directions across the face of
the reflector- with your back to
the beam)
make adjustments by using the
left, right, up and down keys
(this moves the beam in these
directions across the face of
the reflector- with your back to
the beam)
this symbol will
appear next to
the number when
you move the
beam
this symbol will
apear next to the
number when
you move the
beam
to exit sub menus
13