The Land of Nod Harmony Crib User Manual

- Failure to follow these warnings and assembly instructions could result in serious injury or death.
- Read all instructions before assembling crib. Keep instructions for future use.
-Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
-To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
Strangulation Hazard:
- Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck,
such as hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to
toys for any reason.
-To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose
fasteners.
- DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.
Fall Hazard:
- When child is able to pull to standing position, set mattress to lowest position and remove bumper pads,
large toys and other objects that could serve as steps for climbing out.
-When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used
and the child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8
INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15 cm).
- Check this product for damaged hardware, loose joints, missing pats or sharp edges before and after
assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any
parts are missing, damaged, or broken. Contact The Land of Nod® for replacement parts and instructional
literature if needed. DO NOT substitute parts.
- If refinishing, use a non-toxic finish specified for children’s products.
- Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
- Infants can suffocate in gaps between crib sides and a mattress that is too small.
- Periodically check to see that all bolts are securely tightened.
- To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water
using a soft cloth, and dry thoroughly.
- Follow warnings on all products in a crib.
- When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood
furniture.
WARNING:
!
!
WARNING:
!
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: customerservice@landofnod.com • www.landofnod.com
Harmony Crib Assembly Instructions
Made in Vietnam - r06

The Land of Nod Harmony Crib Specifications

General

Brand	The Land of Nod
Model	Harmony Crib
Category	Indoor Furnishing
Language	English

Summary

Important Safety Information

General Safety Warnings

Includes warnings about soft bedding, pillows, comforters, and infant sleeping position.

Strangulation Hazard

Warns against strings around the neck or over the crib, and trapping on loose fasteners.

Fall Hazard

Details hazards related to children climbing out, setting mattress low, and crib age limits.

Mattress Size and Thickness Requirements

Specifies the required mattress dimensions and maximum thickness for safe crib use.

Care and Maintenance Guidelines

Provides guidance on checking for damage, refinishing, avoiding suffocation risks, and cleaning methods.

Product Contents and Assembly Preparation

Choking Hazard Warning

Alerts to the danger of small parts present in the unassembled state.

Hardware Identification

Lists and illustrates all hardware components included in the crib package.

Crib Component Identification

Identifies the main crib panels and parts for assembly.

Assembly Step 1: Back Panel Attachment

Attach End Panels to Back Panel

Connects end panels to the back panel using bolts, washers, and brackets.

Attach Front Panel

Connects the front panel to the assembled end panels using hardware.

Assembly Step 3: Front Rail Panel Attachment

Secure Front Rail Panel

Fastens the front rail panel to the end panels with bolts, washers, and fasteners.

Install Mattress Corner Supports

Inserts corner supports into the crib frame at the desired mattress height.

Assembly Step 5: Mattress Support Installation

Place Mattress Support

Carefully positions the mattress support onto the installed corner supports.

Final Tightening and Completion

Secures corner supports with bolt caps and tightens all fasteners to complete assembly.