The Land of Nod SIMPLE Twin-over-twin Bunk Bed User Manual

WARNING: Failure to follow these warnings and
instructions could result in serious injury or death
!
Follow the information and warnings on bunk end structure and carton. Do not remove
these labels.
Always use the recommended size mattress to help prevent the likelihood of entrap-
ment or falls.
• Surface of mattress must be at least 5" (127 mm) below the upper edge of guardrails.
The maximum thickness of the bunk mattress is 10”
• Use only mattress which is 74” – 75” long and 37 1/2” – 38 1/2” wide
• Never allow a child under 6 years on the upper bunk.
• Prohibit more than one person on upper bunk.
• Periodically check to ensure guardrail, ladder and other components are in their
proper position, free from damage, and that all connectors are tight.
• Do not allow horseplay on or under the bed and Prohibit jumping on the bed.
• Always use the ladder for entering and leaving the upper bunk.
• Do not use substitute parts. Contact the Land of Nod for replacement parts at
800.933.9904
• Use of a night light may provide added safety precaution for a child using the upper
bunk.
• Always use the guardrails on both sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between bed and wall.
• The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD!
• Never attach or hang items to any part of the bunk that are not designed for use with
the bed; for example, but not limited to, hooks, belts and jump ropes.
• Keep these instructions for future reference.
SIMPLE
TWIN-OVER-TWIN BUNK BED

The Land of Nod SIMPLE Twin-over-twin Bunk Bed Specifications

General

Brand	The Land of Nod
Model	SIMPLE Twin-over-twin Bunk Bed
Category	Indoor Furnishing
Language	English

Summary

Safety Warnings and Instructions

General Safety Precautions

Follow all warnings on bunk structure and carton. Use correct mattress size to prevent entrapment or falls.

Strangulation Hazard

Never attach or hang items not designed for the bed, like hooks, belts, or jump ropes.

Product Components and Hardware

Bed Hardware

Lists hardware for bed assembly: phillips bolts, large screws, spring washers, and flat washers.

Guard Rail and Ladder Hardware

Details hardware for guard rails and ladder: allen bolts, phillips bolts, washers, screws, and dowels.

Tools Required for Assembly

Specifies necessary tools: phillips head screwdriver and included allen wrench.

Bunk Bed Components

Lists all individual parts for the bunk bed, including frames, rails, slats, caps, and ladder.

Assembly Steps

Attaching Side Rails to Bottom Frames

Connect side rails to bottom frames using phillips bolts, spring washers, and flat washers.

Installing Bottom Slat Assembly

Place slat assembly into the bottom bed frame and secure with large screws.

Attaching Side Rails to Top Frames

Connect side rails to top frames using phillips bolts, spring washers, and flat washers.

Installing Top Slat Assembly

Place slat assembly into the top bed frame and secure with large screws.

Final Assembly and Care

Installing Guard Rails and Dowels

Attach guard rails using bolts and washers; insert dowels into the bottom frame.

Connecting Top and Bottom Bed Sections

Align top bed assembly holes with dowels on the bottom bed assembly.

Attaching the Ladder

Fit ladder hooks over the top bed assembly and secure with small screws.

Cleaning and Care Instructions

Clean with a dry or damp soft cloth; avoid abrasive cleaners, wax, or polish.