— E26 —
Operation
Using the LINE IN Jack
1
Connect an external unit to the LINE IN
jack. Press the ON/OFF button to turn
the unit on.
2
Connect the external unit to the
LINE IN Jack on the front of this unit.
Connecting an external unit will allow
the audio to be played through your
Singing Machine.
Notes:
• It is highly recommended to set the
volume on the auxiliary unit to 1/3 or
lower to avoid distortion.
• Skipping files/tracks is not possible when
using an external device.
3
Press the
Navigation 4 Right or
3 Left
button to select the Line In
mode and press the ENTER button
to continue. You can also repeatedly
press the FUNCTION button to select
the Line In mode.
4
Adjust the volume using the Master
Volume, TV or external device.
5
Connect the microphone(s) as shown
on page E6. Slide the Mic’s ON/OFF
switch to the ON position.
5
w
x
u
v
To Next Page
Loading...
