— E3 —
Assembly
Not for use with other microphone stands. Only lift unit from bottom base. Use caution when
placing larger-sized devices in holder.
w
y
1
Lift the rubber cover on the top
of the Main unit. Insert the Mic
stand into the Main unit and rotate
clockwise to tighten it.
2
Untighten cradle pole adjustment
cap, pull up on the cradle pole.
Retighten cap to keep in place.
3
Untighten cradle pole cap.
4
Insert then rotate to tighten the
Cradle with Mic holders on the mic
stand.
5
Untighten height adjustment cap
to adjust to a suitable height.
Retighten cap to hold in place
Cradle pole
adjustment cap
Height
adjustment cap
Extendable Mic
Stand
Cradle pole cap
v
u
x
To Next Page
Loading...
