The Singing Machine SMVG-600

Questions and Answers

A
Austin JohnsonAug 16, 2025
Why is there no sound coming from my Singing Machine Karaoke System?
- W
  William JacksonAug 16, 2025
  If you're not getting any sound, there are a few things to check: First, make sure the volume control isn't set to the minimum; turn it up. If you're using a TV or PA system, ensure its volume is also turned up and that it is powered on. Also, verify that the AUX OUT jacks are properly connected, referring to the 'Audio Connection' instructions on page 12.
D
Dorothy JonesAug 19, 2025
What to do if my The Singing Machine Karaoke System CD player cannot work normally?
- B
  becky20Sep 12, 2025
  If your CD player isn't working correctly, displaying unusual symbols, try these steps: Ensure the disc is inserted correctly (label side up). Check if the disc is dirty; if so, wipe it gently with a soft cloth. If the disc is scratched or warped, try using a new one. Make sure you're using a standard disc with the appropriate logo, as described on page 14. If moisture has formed inside the CD deck, wait 20-30 minutes for it to dry out. Lastly, try resetting the Singing Machine by unplugging it for 30 seconds.
P
pwagnerAug 21, 2025
How to fix no song lyrics appearing on the screen of The Singing Machine Karaoke System?
- H
  Heather CruzAug 21, 2025
  If you're not seeing song lyrics on the screen, check the following: Ensure the video cable is properly connected from the Singing Machine’s VIDEO OUT to the TV VIDEO IN. Make sure the source selector on your TV is set to VIDEO using your TV remote. If your TV lacks a video line input, connect from the VIDEO OUT of the system to the VIDEO IN of your VCR, or connect to an RF Modulator and then to the TV cable input, referring to 'Making the Connections' on page 9. Also, if you're using a CDG disc, ensure it's clean and that the CDG indicator is lit.
S
Susan RobinsonAug 25, 2025
Why is there no sound from the mic of my Singing Machine Karaoke System?
- J
  jonestoddAug 25, 2025
  If you're not getting any sound from the microphone, first adjust the mic volume to maximum, then reduce it to a comfortable level. Also, make sure the microphone is turned on using the ON/OFF switch located on it.
J
Jeffrey EllisonAug 28, 2025
How to troubleshoot no power when plugged in The Singing Machine Karaoke System?
- D
  Donald RothAug 28, 2025
  If your Singing Machine Karaoke System isn't powering on when plugged in, the AC outlet may not have power. Check the outlet by plugging in a working lamp or another electrical appliance.
D
douglas86Aug 31, 2025
What to do if there is no sound when using home stereo with The Singing Machine Karaoke System?
- K
  karengoodwinAug 31, 2025
  If you are not getting sound when using a home stereo system, ensure that the source selection on your stereo is set properly. Select AUX IN as the source. Also, verify that the connection to the stereo system or PA is correct, following the directions on page 12 for connecting to a home stereo system.
R
Randy GreenSep 2, 2025
What to do if there is no sound when using TV or VCR with The Singing Machine Karaoke System?
- S
  Stephen SchultzSep 3, 2025
  If you are not getting sound when using a TV or VCR, the source selection on the TV or VCR may not be correct. Follow the directions on page 10 for ‘Video Connection.’
T
Thomas PowellSep 5, 2025
What to do if the picture is jumping up on The Singing Machine Karaoke System?
- L
  lopezmichaelSep 5, 2025
  If the picture on your Karaoke System is jumping up, the VERTICAL HOLD Control is not set correctly. Adjust the VERTICAL HOLD Control to stabilize the image.
S
Samuel CollierSep 8, 2025
Why is there no image display on The Singing Machine Karaoke System monitor?
- M
  morganhallSep 8, 2025
  If there is no image displaying on the Singing Machine’s monitor, check if the Camera Lens is down and lift it up. Also, ensure that the Monitor Selector is set to CAMERA mode.
D
David RyanSep 12, 2025
How to troubleshoot no power when POWER is on for The Singing Machine Karaoke System?
- C
  Christopher NashSep 12, 2025
  If there's no power even when the power switch is on, make sure the DC jack is properly inserted into the DC socket on the back of the cabinet.