Refresh the logs.
System Management
The System Management menu gives you a wealth of settings that you can use to
configure your N0204’s system administration functions. You can set up system
time, system notifications, and even upgrade firmware from this menu.
Time: Setting System Time
From the Time menu, choose the Time item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on the N0204 with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Time
Item Description
Date Sets the system date.
Time Sets the system time.
Time Zone Sets the system time zone.
Sync with external NTP
Server
Select YES to allow the N0204
miniNAS
to synchronize with an
NTP server of your choice. Press Apply to change.
WARNING
If an NTP server is selected, please make sure your N0204’s network has been
setup to access the NTP server.
To Next Page
Loading...
