Appendix A: Product Specifications
Hardware Specifications
Item Spec
Processor Oxford 810DSE
SATA Controller Oxford 810DSE
System Memory 128MB DDR2 on board
Flash memory 4 MB
LAN Interface RJ-45x1 10/100/1000 BASE-TX Auto MDI/MDI-X
USB Interface USB 2.0 host port x1 (Front)
USB 1.1 host port x 1 (Rear)
LED indicator Power(Blue)
HDD1 Failed/Activity(Red/Orange)
HDD2 Failed/Activity(Red/Orange)
LAN (Link/Activity) : Green
USB Copy: Blue
Power supply 15W External power adaptor
Disk interface 2.5” SATA x2 via backplane
Thermal control System temperature status
Buttons 1. Power button
2. USB copy button
Chassis Plastic and aluminum chassis
Environment Temperature : 5C to 40 C
Humidity : 0 ~ 80 % R.H. (Non-condensing)
Software Specifications
RAID
RAID modes RAID 0, 1 and JBOD
Auto-rebuild Supported
Hot-swap Supported
Network
Configuration Fixed IP Address, Dynamic IP Address,
Transport Protocols TCP/IP, AppleTalk, UPnP
File Protocols SMB/CIFS, HTTP/HTTPS, FTP,AFP
Wireless LAN 802.11b/g USB Dongle AP/Client mode Supported.
AP mode (ZD1211x based)
Data Access
Client OS support Windows NT/2000/XP/2003/Vista
Mac OS 9 / X
WebDisk Web-based file access
FTP File transmission protocol
Download Manager HTTP / FTP / BT (DLM2)
Printer Server (IPP) 1. Support USB printers
2. Support IPP various printers
3. Client can manage print job queue on WEB interface
Data Backup
USB copy (From
external USB disk to
Copy USB Mass storage device contents to specified
location to NAS
To Next Page
Loading...
Need help?
General
