Sender’s E-mail Address Set senders email address to send email notifications.
Receiver’s E-mail Address
(1,2,3,4)
Add one or more recipient’s email addresses to receive email notifications.
Schedule Power On/O3.3.7
Using the Thecus IP storage System Management, you can save energy and money by scheduling
the Thecus IP storage to turn itself on and off during certain times of the day.
From the System Management category, choose the Schedule Power On/Off item and the Schedule
Power On/Off screen appears.
To designate a schedule for the Thecus IP storage to turn on and off, first enable the feature by
checking the Enable Schedule Power On/Off checkbox.
Then, simply choose an on and off time for each day of the week.
Finally, click Apply to save your changes.
Example - Monday: On: 8:00; O: 16:00
System will turn on at 8:00 AM on Monday, and off at 16:00 on Monday. System will turn on for the
rest of the week.
If you choose an on time, but do not assign an off time, the system will turn on and remain on until a
scheduled off time is reached, or if the unit is shutdown manually.
Example - Monday: On: 8:00
System will turn on at 8:00 AM on Monday, and will not shut down unless powered down manually.
You may also choose two on times or two off times on a particular day, and the system will act ac-
cordingly.
Example - Monday: O: 8:00; O: 16:00
System will turn off at 8:00 AM on Monday. System will turn off at 16:00 PM on Monday, if it was on. If
the system was already off at 16:00 PM on Monday, system will stay off.
To Next Page
Loading...
