Simply enable the “Recycle Bin” function and “Recycle Folder Display” then all of deleted files/folders
will reside in the “_NAS_Recycle_(Associated RDID Volume)” share folder.
For example, the system has created 2 RAID volumes with ID “RAIDpm” and ‘RAID”. Then it will have 2
recycle bin folder appear as “_NAS_Recycle_RAID” and “_NAS_Recycle_RAIDpm”.
There are 2 more setting could help to manage the recycle bin for deleted folders/files.
Setup the “Day” to remove deleted folders/files which has resided in recycle bin permanently. 1.
Left default value “0” if desired to clean up recycle bin manually.
Setup the “Size” for recycle bin to allow deleted folders/files can store. Left default value “0” 2.
with no limitation.
The deleted les/folders which have resided in recycle bin will keep •
its permission. On the other hand, only the admin and owner can
view/read/write these folders/les.
If deleted single le size is large than 2GB then it won’t reside in the •
recycle bin but erase permanently.
To Next Page
Loading...
Need help?
General
