Restore•
To restore a backup from the backup task, simply select a task from the task list then click “Restore”
from the function bar. The restore task will start to have the associated files/folders from the target
server restored to the source.
Restore NAS Conguration•
This is a useful feature if the system configuration needs to be restored to a brand new unit. Let’s go
thru the following example to see how it works.
The original source system has 3 RAID volume, “RAID”, ‘RAID10” and “RAID20”, and has backed up the
system configurations to the target server.
The brand new source unit only has a 1 RAID volume ‘RAID”.
When adding a new backup task with “Full backup” or “Custom backup” and enabling the 1.
option “Backup NAS Config” as shows below, the source unit system configurations are then
backed up to the designed path on the target system every time the task is executed.
To Next Page
Loading...
