Step 1
Remove Filter Top
Slide the clamp on the lter to the open position and
remove the lter top.
Step 2
Remove Screws
Remove the 2 screws holding the rods onto the lter
media base.
REPLACING THE FILTER MEDIA:
We recommend that lter pads be replaced yearly or when pads show signs of wear and tear.
WARNING:
Before performing any maintenance, always unplug the AllClear
™
G2 Filter from the
power source.
Watch a video of the AllClear™ G2 Filter maintenance
online @ www.thepondguy.com/allclearg2
Tools Required:
• #2 Phillips Screwdriver
• Replacement UV Bulb
• Soft, damp cloth
• Descaler such as Pond Equipment Cleaner
• Replacement quartz sleeve if yours is damaged or cracked
• Replacement lter media pads
MAINTAINING YOUR ALLCLEAR
™
G2 FILTER:
thepondguy.com | 866-POND-HELP (766-3435)
8
To Next Page
Loading...