• Let the gear box drain for about 15 – 20 minutes. After the gearbox has
been drained, re-insert the oil drain plug into the gear box and wipe any
excess oil with a paper towel or rag from the bottom of the gear box.
• Using the Phillips-Head Screwdriver re-attach the lower shroud(s). There
are 5 screws per side.
• For filling the gear box with new oil, you will first need a Flat-Head
Screwdriver, a funnel, and a new quart of 85w-140 gear oil (do NOT use any
other gear oil)
To Next Page
Loading...