en-us Alarm
22
Information on data protection
The first time your Home Connect appliance is
registered on a WLAN home network connected to
the Internet (Wi-Fi), your appliance will transmit the
following types of data to the Home Connect server
(initial registration):
■ Unique appliance identification (consisting of
appliance codes as well as the MAC address of
the installed Wi-Fi communication module).
■ Security certificate of the Wi-Fi communication
module (to ensure a secure data connection).
■ The current software and hardware version of
your domestic appliance.
■ Status of any previous resetting to factory
settings.
This initial registration prepares the
Home Connect functions for use and is only required
when you want to use these
Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can be utilized only in conjunction with the
Home Connect app. Information on data protection
can be called up in the Home Connect app.
MAlarm
Al a r m
Door alarm
If the appliance door is open for a long time, the
door alarm switches on. A message appears on the
control panel.
Switching off the door alarm
■ Close the door.
Note: To mute the door alarm, you only have to
acknowledge the message on the control panel. If
the door remains opens a few more minutes, the
message will appear again.
Temperature alarm
If the freezer compartment becomes too warm, the
temperature alarm is switched on. A message
appears on the control panel. The message shows
the warmest temperature reached in the freezer
compartment.
9 CAUTION
DURING THE THAWING PROCESS, BACTERIA
MAY DEVELOP AND SPOIL THE FROZEN
ITEMS.
Do not refreeze partly or completely thawed
food.
Refreeze food only after cooking. No longer
store the frozen items for the maximum storage
period.
Note: The alarm may be actuated without risk to the
food in the following cases:
■ The appliance is put into service and does not yet
contain any food.
■ Large quantities of fresh food are placed in the
appliance.
■ The freezer compartment door has been open
too long.
Switching off the temperature alarm
1. Check that the cause of the temperature alarm
has been eliminated.
2. Press 8 button to acknowledge the message.
The message disappears. The control panel
again indicates the temperature selected.
From this time on the warmest temperature is
recalculated and saved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
