Thermal Arc FABRICATOR 210 Owner's Manual

FAB RI CA TOR 210/250
MIG Power Sup plies
For the Fol low ing Specs:
•
100047A-1 Fab ri ca tor 210
•
100048A-2 Fab ri ca tor 250
OWNER’S MAN UAL Num ber 430429-478 (Rev AA)
Re vised Oc to ber 23, 2000
THERMAL ARC INC., TROY, OHIO 45373-1085, U.S.A.
IMPORTANT: Read these instructions before installing, operating, or servicing this system.

Thermal Arc FABRICATOR 210 Specifications

General

Input Phase	Single Phase
Input Frequency	50/60 Hz
Welding Processes	MIG, Flux-Cored, Stick
Wire Feed Speed	50 - 700 IPM
Wire Feed Speed Range	50 - 700 IPM
Welding Amperage Range	30-210 A
Wire Diameter Range	0.023 - 0.045 in