AMP 400-1000L I&O Manual 27
VII(continued)
I. Mulple Appliance Terminaons
in Figure 12
of the
are shown in Figure 12
in
J. Terminal Installaon
terminal so that the seam in the terminal is at
Adhere to the minimum and maximum wall
WARNING WARNING
Moisture and ice may form on the surface
around vent termination.
Do not allow low spots in the vent where con-
densate may pool.
diameters.
sealed and airtight.
Alteration of the appliance vent connection is
WARNING WARNING
To Next Page
Loading...
