Congratulations on your new PC! Accessing the I/O panel and connecting your
peripherals to the Tower 600 case is easy! Follow along this guide to learn how:
TOWER 600 PERIPHERAL SETUP GUIDE
Monday through Friday
9:00am - 5:30pm PT
NEED ADDITONAL HELP? CONTACT US:
ttsupport@thermaltakeusa.com
888 - 570 - 5247
STEP 1
STEP 4
Feed your cables through the the cutouts
on their corresponding sides.
STEP 2
Remove the top cover by pulling up at
the cutout on the back of the case.
For more space to access the I/O cutouts,
remove the back panel by pulling on the
notch at the top of the back panel.
STEP 3
Loosen the 2 thumb screws to swing
the top fan bracket latch open to access
the I/O ports from the top.
Disconnect any fan cables as needed to
fully remove the top fan bracket.
BACK BACK
FRONT FRONT
Monitors and
other displays
All other peripherals
To Next Page
Need help?
General
