EasyManua.ls Logo

THERMEx Decor 810 - If the Product Does Not Work

THERMEx Decor 810
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
English
IF THE PRODUCT DOES NOT WORK
Table 2
IF THE PRODUCT DOES NOT WORK
Before you contact the technical service:
Make sure that the product is plugged in and the electric fuse of the electric wiring is running. Do
not take any action that will damage the product.
Before you contact with technical service, check your cooker hood according to Table 2.
If the problem goes on, contact the seller or the most authorized service.
Check electric connection
(Voltage of the electric network should be
between 220-240V, cooker hood should be con-
nected to grounded plug.)
Check motor switch
(Motor switch should be at on position)
Check lamp switch
(Lamp switch should be at on position)
Check aluminum filter
(Aluminum Cassette Filter should be washed
once a month at normal
conditions.)
Check lamps
(Lamps should be firm.)
Check outlet
(Outlet should be open)
Check Carbon Filter (Carbon filter should be
replaced with a new one each 2-3 months at the
models with Carbon Filter at normal conditions)
Cooker-hood
does not work
X X
Illumination Lamp
does not work
X X X
Cooker-hoods
air suction is weak
X X X
Cooker-hood does not
direct air out (at places
without chimney)
X X
Decor 810_830_24771.indd 59 30/06/10 07.18

Related product manuals