Need help?Do you have a question about the Therminon N and is the answer not in the manual?
General| Brand | Therminon |
|---|---|
| Model | N |
| Category | Heating System |
| Language | English |
The composite manifold with pump group is available in two models: N and LTV.
Width depends on the number of groups and is measured from the start of the first group.
Lists technical specifications for the manifold, including medium, pressure, and temperature.
Details the adjustment valve functionality for the LTV model.
Instructions for mounting the manifold on the wall and attaching the thermostat knob.
Connects the heat/cold source and underfloor heating pipes to the manifold.
Procedures for filling the underfloor heating pipes and ensuring air is removed.
Pressurize the system and complete the pressure test report.
Set the calculated flow for each group to guarantee optimum comfort statically.
Set the calculated flow for each group to guarantee optimum comfort dynamically.
Optional installation of zone actuators for independent room temperature control.
Adjust the valve to specify whether the manifold operates neutrally or actively.
Read guide, use qualified installer, avoid hot water contact, use correct pipes.
Follow steps to empty, disconnect, unscrew, and take manifold for recycling.
Lists common malfunctions, their causes, and solutions for the manifold.
To Next Page