Need help?Do you have a question about the Thermo Scientific 381 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | 381 |
| Category | Accessories |
| Language | English |
Description of buttons, indicators, and displays on the incubator control panel.
Explanation of how to navigate and operate the incubator using the keypad.
Steps for correctly positioning and installing the incubator unit.
Instructions and precautions for securely stacking incubators.
Steps for safely connecting the incubator to a power source.
Instructions on how to fill the incubator's humidity pan.
Procedure for safely connecting the CO2 gas cylinder and regulator.
Steps to perform after initial installation before normal operation.
Guide for setting the desired incubator operating temperature.
Procedure for configuring the incubator's overtemperature safety setpoint.
Instructions for setting the target CO2 concentration in the chamber.
Steps to calibrate the temperature sensor against a reference instrument.
Procedure for calibrating the T/C CO2 sensor.
Procedure for calibrating the IR CO2 sensor.
Guide for calibrating the optional relative humidity sensor.
Setting the deviation from setpoint for the low temperature alarm.
Details on the TMP CNTR ERR alarm for temperature control failure.
Information about alarms indicating sensor malfunctions.
Detailed instructions for running the incubator's sterilization cycle.
Specific warranty terms and conditions for Thermo Fisher Scientific incubators in the USA.
Warranty terms and conditions for Thermo Fisher Scientific incubators outside the USA.
To Next Page