Need help?Do you have a question about the Thermo Scientific 3110 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | 3110 |
| Category | Accessories |
| Language | English |
Defines proper application scope, prohibited uses, and general safety warnings for incubators.
Identifies and describes the main components of the water jacket incubator.
Explains the function of each key, display, and indicator on the control panel.
Provides instructions on physically placing and setting up the incubator unit.
Guides on connecting the incubator to a suitable electrical power source.
Explains how to connect the CO2 or N2 gas supply to the incubator.
Details how to set key operating parameters like temperature and gas concentrations.
Step-by-step guide to calibrate the temperature sensor and system.
Instructions for calibrating the Thermal Conductivity CO2 sensor.
Guide to calibrating the Oxygen control system.
Procedure for calibrating the relative humidity sensor.
Defines the thresholds for low and high temperature alarms.
Configures the display for temperature, humidity, CO2, and O2 readings.
Configures the reminder for HEPA filter replacement.
Provides an overview of the incubator's alarm system.
Details specific alarm conditions like inner door open and sensor faults.
Provides instructions for cleaning the interior surfaces of the incubator.
Step-by-step guide for replacing fuses in the incubator.
Instructions for draining the water from the incubator's jacket.
Procedure for replacing the O2 sensor fuel cell.
Details various optional features like connectivity and gas control.
Lists specifications for temperature, gas, humidity, and other operational parameters.
Lists all spare parts applicable to all models of the incubator.
Lists spare parts specific to 115V and 230V models.
Provides electrical schematic diagrams for the incubator models.
Details wire references and sensor values for electrical connections.
To Next Page
