Need help?Do you have a question about the Thermo Scientific 3141 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | 3141 |
| Category | Accessories |
| Language | English |
Covers locating, installing, and positioning the incubator unit.
Instructions for connecting the unit to electrical power and gas supplies.
Procedures for filling the water jacket and humidity pan with appropriate water.
Steps to start the incubator and enter initial system setpoints.
Guides on setting temperature, overtemp, CO2, and O2 setpoints.
Details how to calibrate the incubator's temperature using a reference instrument.
Instructions for calibrating T/C and Infra-Red CO2 sensors.
Procedures for calibrating the O2 system, including at 20.7% and offset.
Setting CO2 alarm limits and configuring T/C sensor zero/span values.
Step-by-step guide for thoroughly cleaning the incubator's interior surfaces.
Procedures for replenishing rust inhibitor and replacing the O2 sensor.
Technical specifications for temperature control, range, uniformity, and over-temp protection.
Technical specs for CO2/O2 control, ranges, sensors, and humidity monitoring.
To Next Page