Need help?Do you have a question about the Thermo Scientific CRYO Plus 2 and is the answer not in the manual?
General| Refrigerant | Liquid Nitrogen (LN2) |
|---|---|
| Cooling Method | Liquid Nitrogen (LN2) |
| Controller | Microprocessor-based controller |
| Alarm System | High/low temperature alarm, LN2 level alarm |
| Material | Stainless steel |
| Control Interface | Digital display |
| Temperature Stability | ±0.5°C |
| Power Requirements | 50/60Hz |
| Applications | Sample storage |
Connect the LN2 supply line to the storage unit.
Connect the unit's power cord to the electrical outlet.
Connect the unit to a grounded electrical receptacle.
Procedure for filling the unit with liquid nitrogen.
Test key system elements to confirm correct installation.
How to change high and low liquid level setpoints for filling.
Procedure for setting the high temperature alarm threshold.
Guide to diagnose and resolve front panel alarms with error codes.
Detailed technical specifications for CryoPlus models.
Safety precautions and procedures for handling liquid nitrogen.
To Next Page