Need help?Do you have a question about the Thermo Scientific CRYO Plus 1 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | CRYO Plus 1 |
| Category | Laboratory Equipment |
| Language | English |
Connects the unit to the liquid nitrogen supply source for filling.
Connects the unit to an electrical power source for operation.
Ensures the unit is properly connected to a grounded electrical outlet.
Procedure for installing the platform riser based on inventory control system.
Details on installing the temperature sleeve for optimal performance.
Instructions for the initial filling of the storage container with liquid nitrogen.
Tests key elements to confirm correct system installation and operation.
Compares the liquid level on the bar graph with the actual level in the tank.
Overview of the control panel buttons, displays, and indicators for operation.
Explanation of the tri-color bar graph indicating liquid level and setpoints.
Guidance on programming the unit's controller and setting parameters.
Procedure to adjust the high level setpoint where the filling process stops.
Procedure to adjust the low level setpoint where the filling process starts.
Setting the temperature threshold for the high temperature alarm activation.
Instructions for setting the real-time internal clock for system logging.
Details on installing and using the optional printer for logging functions.
Procedure to safely defrost the storage tank by allowing it to warm.
Procedure to defrost the vent port by allowing it to warm at room temperature.
Catalog of optional accessories available for the CryoPlus storage system.
Details specific part variations or differences across different model series.
Information on rack systems and their compatibility with unit models.
Safety precautions and procedures for the safe handling of liquid nitrogen.
Guidance on immediate actions to take in case of exposure to liquid nitrogen.
To Next Page