Thermo Scientific QuantStudio 1

Questions and Answers

K
Kevin RuizAug 12, 2025
How to fix inconsistent communication between Thermo Scientific Laboratory Equipment and computer or Cloud?
- T
  Tanner BennettAug 12, 2025
  To resolve inconsistent communication issues with your Thermo Scientific Laboratory Equipment, ensure that only one connectivity option is active at a time. The instrument might be configured for both wired and wireless network connections. Use either an Ethernet cable or a wireless adapter, but not both. Also, consider that a weak or unstable internet connection, especially if configured for wireless, can cause this issue. Try using a wireless network with a stronger signal or switch to a wired connection.
J
Joan RamirezAug 19, 2025
What to do if the touchscreen is black on Thermo Scientific QuantStudio 1?
- P
  padillajasonSep 12, 2025
  If the touchscreen on your Thermo Scientific Laboratory Equipment is black, it might be in sleep mode. Simply touch anywhere on the screen to wake it up. If that doesn't work, check if the instrument is powered on. The power switch is located on the rear panel. Also, ensure the instrument is properly plugged in.
R
robinsonheidiAug 27, 2025
How to resolve insufficient disk space message on Thermo Scientific Laboratory Equipment?
- C
  cclineAug 27, 2025
  If your Thermo Scientific Laboratory Equipment displays an insufficient disk space message, it means there isn't enough space to save a run. To fix this, go to the home screen, touch Settings, then Run History, and finally Manage. From there, you can delete or transfer experiments from the instrument to free up space.
W
warneramandaSep 3, 2025
What to do if the connection between Thermo Scientific QuantStudio 1 Laboratory Equipment and the computer is not recognized?
- B
  barryrachelSep 3, 2025
  If the connection between your Thermo Scientific Laboratory Equipment and the computer isn't recognized, try powering the instrument off and then on again. If you're using a networked configuration, the instrument and computer might not be on the same subnet mask, or the instrument or computer might have an invalid IP address. In this case, contact your information technologies department to ensure that the instrument and computer are on the same subnet mask and that the IP addresses are valid.

Thermo Scientific QuantStudio 1 Specifications

General

Type	Real-Time PCR System
Detection Method	Fluorescence
Connectivity	USB, Ethernet
Thermal Cycler Type	Peltier-based
Sample Capacity	96-well
Temperature Range	4°C to 100°C
Software	QuantStudio Design and Analysis Software
Supported Applications	Gene expression, Mutation detection
Block Format	96-well
Excitation/Emission Filters	Multiple options available
Data Analysis	Melt Curve
Weight	Varies by configuration
Optics	LED excitation, CCD detection
Display	Touchscreen
Power Requirements	100-240 VAC, 50/60 Hz