Thermo Scientific QuantStudio 1 - Create an Administrator Instrument Profile During Initial Start-Up; Create a New Instrument Profile

Create an administrator instrument profile during initial start-up
During initial start-up, the user is automatically prompted to create an administrator
instrument prole. See “Initial start-up“ on page 25.
• The rst instrument prole that is created during installation is given
administrator privileges.
• Administrators can grant administrative privileges to other users. See “Manage
all instrument proles (Administrator only)“ on page 37.
1.
Touch Name, enter a username, then touch Done.
2.
Touch PIN, enter a four-digit numerical password, then touch Enter.
Note: Touch the Show PIN checkbox to switch PIN display on or o.
3.
Touch Conrm PIN, then repeat step 2.
4.
Touch Create prole.
Create a new instrument profile
1.
In the home screen, touch
Sign In, then touch Get Started.
2.
Touch Name, enter a username, then touch Done.
3.
Touch PIN Code, enter a four-digit numerical password, then touch Enter.
Note: Touch the Show PIN checkbox to switch PIN display on or o.
4.
Touch Conrm PIN, then repeat step 2.
5.
Touch Create prole.
6.
Sign in to the prole you just created. See Sign in.
Note: To enable access to the Thermo Fisher Cloud, see “Link an instrument prole
with the Thermo Fisher Cloud“ on page 38.
Chapter 3 Configure the instrument and manage instrument profiles
Create an administrator instrument profile during initial start-up
3
QuantStudio
™
1 Real-Time PCR System Installation, Use, and Maintenance Guide
27