Option Procedure
Define and assign samples
in the well table view
1. Touch .
2. Touch Edit to edit sample names for individual
wells.
3. Touch a sample name field, enter a new name,
then touch Done.
View target information
1. Touch .
2. Touch Manage or touch an individual well.
3. Touch the Targets subtab.
4. Touch Details to view target information, then
touch Done.
3.
Touch Done to return to the Plate tab.
View, pause, or stop a run
Do any of the following actions during an instrument run.
• View real-time data and plots (see “View real-time data and plots on the
instrument touchscreen“ on page 46).
• Adjust the display of real-time plots (see “Adjust the display of real-time plots on
the instrument touchscreen“ on page 47).
– Touch or swipe left once to view real-time run method information or to
edit the number of cycles.
– Touch or swipe left twice to view real-time data and plots.
• Pause or stop an instrument run (see “Pause or stop an instrument run“ on
page 47).
1.
In the instrument home screen, during an instrument run, touch or swipe left
twice.
2.
Touch Well details.
3.
Touch Samples, Targets, or Tasks to select a graphical representation of each
selection.
4.
Touch Close to return to the home screen.
View real-time
data and plots on
the instrument
touchscreen
Chapter 4 Create and run experiments on the instrument
View, pause, or stop a run
4
46
QuantStudio
™
1 Real-Time PCR System Installation, Use, and Maintenance Guide
To Next Page
Loading...
